Garage Doors and Their Openers – Extend Their Lives With These Simple Steps

Rust on the springs is a common problem as garage doors are exposed to a great deal of bad weather, damp, rain, and snow in some areas. Rust on the springs adds friction to the coil which then corrodes the coil before weakening the springs. This can be avoided with regular maintenance to the springs; lubricant should be applied every 4 months at the very least.

Image result for locksmith in Hanover

Incorrect springs

Different garage door openers have different springs. Some springs are longer with thinner wire, while others may be shorter or have thicker wires, depending on the door and on the opener. If the wrong spring is used it can weaken very quickly and break.

Wear and Tear

As with all things, usage results in breakage in the end. The more you use it, the more quickly it gets to end of its life. Garage doors are made to open twice a day, not as a rule, but use it a general guideline. Overuse will burn it out very quickly schlüsseldienst in Hannover.

Keep an Eye Out for Loose or Worn Parts

You need to be familiar with your garage door and how it should look. Once a month, check all of the parts that should be tight, are tightened. Check is anything is getting overly worn or looking tired, especially around cables and wire. Also listen out for any unusual noises you don’t normally hear. If everything checks out alright, you can get you can schedule an annual check-up with a professional garage door installer.

Make sure the photo eye that picks up the signal from your remote control is clean, and give it a wipe with a damp cloth from time to time. This plays an important role and keeping everything moving. Check that it is facing the right way at the correct angle.

Balance everything out

Test the balance of your garage door springs by releasing the emergency release cord. This will separate the door from the door opener and you can manually lift the door open. It should lift smoothly and with ease. If it is difficult, you feel resistance or the garage door closes without staying in place, it indicates worn springs. This should be checked out by a professional. Industrial springs operate at an incredibly high level of tension and they are very dangerous. This inspection can be done at home once a month.

Leave a Reply

Your email address will not be published. Required fields are marked *